Home > Connectors> IDE/SATA >IDE-ATA 40 Pin
	IDE-ATA 40 Pin
		The connector used in following Connecting internal 5.25" Optical Devices Connecting internal 3.5" Hard Drives
	Description
	IDE (Integrated Drive Electronics) is a standard electronic interface used between a computer motherboard's data paths or bus and the computer's disk storage devices. The IDE interface is based on the IBM PC Industry Standard Architecture (ISA) 16-bit bus standard, but it is also used in computers that use other bus standards. Most computers sold today use an enhanced version of IDE called Enhanced Integrated Drive Electronics (EIDE). In today's computers, the IDE controller is often built into the motherboard. IDE was adopted as a standard by American National Standards Institute (ANSI) in November, 1990. The ANSI name for IDE is Advanced Technology Attachment (ATA). The IDE (ATA) standard is one of several related standards maintained by the T10 Committee.
	Similar Connectors		Related Connectors
	IDE-ATA 44 pin  SATA  Serial Attached SCSI (SAS)		IDE-ATA 44 pin SATA Serial Attached SCSI (SAS)
	Write a review for this Connector